saws used for sale (1,291)

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 4400 operating hours Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.

Saw band dimensions X/Y/Z: 2450mm/27mm/0.9mm, max. cutting capacity at 90°: 220mm/220mm, max. cutting capacity at 45°: 150mm/150mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 1300mm/800mm/1500mm, weight: approx. 250kg. An on-site inspection is possible.

Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.

Material feed in any length (max. stroke 400 mm) Cutting diameter: around 360 mm, square steel 90°: 360 x 360 mm Cutting speed infinitely adjustable: 17 - 110 m / min. Conveyor Instruction manuals and additional saw blades available Further technical data on request Machine weight: approx. 2,400 kg

Band Saw Optimum S300 VG BJ 2000

Max. saw blade diameter: 400 mm Pneumatic material tensioners

Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With saw blade welder Ideal BS0/16 with band shears and whetstone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very neat condition

Key data: 400 mm

gebr. V. Bandsäge Fabr. Bauer (with only about 50 operating hours) incl. welding device for the saw blades Saw blade rollers diameter 400 mm Saw blade length 3000 mm Table size 520 x 470 mm Dimensions: 600 x 700 x 1800 mm Weight approx. 280 kg

V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts

Bernardo Specifications Cutting range around 90° 125 mm Cutting area flat 90° 100 x 150 mm Cutting range around 45° 95 mm Cutting area flat 45° 95 x 76 mm Cutting range around 60° 50 mm Cutting area flat 60° 50 x 56 mm Working height 730 mm Saw blade dimensions 1638 x 13 x 0.65 mm Cutting speeds 23 / 34 / 54 m/min Engine output S1 100% 0.55 kW Motor input power S6 40% 0.75 kW Voltage 230 V Machine dimensions (L x W x H) 1000 x 550 x 1100 mm Weight approx. 68 kg

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

Key data: 670 mm

Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg

Key data: 280 mm

Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...

Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

Key data: 400 mm

Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades

Key data: 300 mm

Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg

The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power  ...

gebr. Types - Circular saw, Fabr. Gema, Type HGB Accessories: Vise

Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request

Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

Max. saw blade diameter: 250 mm Manual material tensioner Saw blade lubrication

BS275TOP Metal Band Saw Can be swivelled up to 60° Max. Cutting height of 225 mm 400V 1.5 kW 50Hz Swivel range 0°-60° Cutting capacity round Ø 90° 225mm Cutting capacity round Ø 45° in 160mm Cutting capacity round Ø 60° 100mm Cutting capacity LxH 90° 200x200 mm Cutting capacity LxH 45° 160x160 mm Cutting capacity LxH 60° 100x100 mm Saw blade 2450 x 27 x 0.9mm Saw blade speed 37.5 / 75 m/min Weight 195 kg

Offer 25282 Specifications: - Saw blade diameter 600 mm - Cutting area at 90° - 190 x 190 mm - 100 x 310 mm - mitred at 45° - 170 x 170 mm - 100 x 220 mm - Saw blade speed 2800 rpm - Drive approx. 4.5 kW - Space requirement approx. W 1470 x H 1800 x D 1550 mm - Weight approx. 450 kg - Digital degree positioning display - Pneumatic device with pneumatic clamping cylinder -Saw blade - Discharge roller conveyor with dimension stop + digital display 5000 mm

Band saw Jäspa Compakt 2

Band Saw Machine Metallkraft BMBS 300x 320 CNC BJ 2022

A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.