presses: other used for sale (235)

Inkjet printing system with Secure Track and Trace solution TTS. A marking and verification system for corresponding folding boxes (single or double-sided). Machine incl. PLC SIEMENS type Simatic S7-1200, Printer REA-Jet HR pro, etc.

BARCODE PRINTER / LABEL PRINTER CAB A4 + Equipment / Additional information: Printer method: thermal transfer / thermal direct Resolution: 203 dpi, 300 dpi or 600 dpi Print speed: 200 mm / sec (203 dpi), 152 mm / sec (300 dpi) Maximum print width: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB master interface, slot for CompactFlash memory card

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

Inv. Num. : 8752 Type: G3521 Producer: SOMA Created: 1995 Parameters: The conversion to a printing press took place around 1995.

Inv. Num. : 8433 Type: F190 CR Producer: Stratasys Generated: Parameters: Scope of delivery: PC with software Filament dryer Washing machine to remove the support material Filament vacuum cleaner Printheads and pads Number of filament spools

Inv. Num. : 8326 Type: STAR G2 Producer: SPS VITESSA Created: 2003 Parameters: Maximum format size: 102 x 72 mm Equipment: ULTRATERM UV/HAC drying tunnel

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage.

A complete 2-color flatbed screen printing line from Systec/ESC with a screen printing machine from 2017 for decorative printing is available. 1) Systec/ESC screen printing machine, unwind unit: Systec, center module: Systec, rewind unit: Systec, printing unit 1/2: ESC, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3, machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. 2) MF-Hamburg CVK420-17 cooling section/cooling tunnel, year of manufacture: 2016, cooling principle: radiant and convection cooling, working height: 920mm, belt width: 420mm, conveyor belt: PUM2 smooth belt, total section length: 20250mm, total section width: 720mm. 3) Hobart FUX-IND 3-S-A-R-DSK-DSK-3 C25 continuous cleaning system, year of manufacture: 2023, passage width: 612mm, passage height: 440mm, conveying direction: left-right, dosing units: 2, machine dimensions X/Y/Z: approx.  ...

Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible.

Offered is a single-color pad printing machine by Printing International. Cliché size: 100mm/100mm, max. workpiece size: approx. 130mm/170mm, max. print image diameter: approx. 60mm, max. pad stroke: 100mm, max. output: 1200cycles/h. The machine is pneumatically operated with an open ink well system. Viewing by appointment is possible.

Reference ID PP-59633 Category Screen Printer Manufacturer - Model S-LINE Year Built 2022 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Screen Printing Carousel for Textile Printing VERSATRONIC S-lim Number of stations / pallets: 8 Number of print heads: 6 Maximum printing area: 400 x 450 mm Pallet drive: frequency-controlled AC servo gear drive Squeegee Drive System High-precision AC servo drive 4-piston POWER squeegee system Main Control Rotary arm with control panel and 7" SMART touchscreen Microprocessor with diagnostic program Printing Programs 6 standard programs High opacity MULTIFLASH program Cooling stop Test print Start / stop Screen cleaning mode Pallet stop between print heads Free running mode Accessories 8 aluminium sandwich pallets 420 x ...

Offered is a repair-needing single-color pad printing machine Tampoprint. Doctor cup diameter: 90mm, max. print image diameter: 85mm, cliché size: 100×215mm, printing force: approx. 1100N, max. pad stroke above printed material: 110-150mm, pad stroke above cliché: 40mm, max. pad installation height: 92mm. Machine weight: approx. 120kg, dimensions X/Y/Z: 600mm/1000mm/900mm. The machine is mechanically in order, but only prints in continuous operation, and the dwell time function is no longer available. Inspection possible by arrangement.

A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible.

Reference Num.: 4447Brand: HeidelbergType: KSB Cylinder 40 x 57 cmAvailable: directlyStatus: In productionLocation: Deutschland

A repair-required Summa tangential plotter is available. Media width range: 170mm-1620mm, max. cutting width: 1575mm, max. cutting speed: 800mm/s, material thickness range: 0.05mm-0.25mm, repeatability: +/-0.1mm. Machine dimensions X/Y/Z: approx. 2300mm/550mm/1100mm, weight: approx. 75kg. The cutting head of the machine has an unknown defect. An on-site inspection is possible.

Size: 0x0Equipments:envelope feederbelt deliveryMax. format size: 36.5 x 35 cmMaximum passage width: 36.5 cm

A screen printing system is offered. This was extensively overhauled in 2016 and has rarely been used since then.

A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible.

Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.

5 printing presses, - 1 enamel body, - 6 UV drying (air-cooled), - Rotary stamping press, - GAP Master, - BST video train surveillance, Fully rotary 355.6 mm, Maximum track width: 340 mm, Bagnbreite min.: 120 mm, Track width max.: 340 mm, Maximum track width: 340 mm, Bag width min.: 120 mm

A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Equipments:1 x feed table, 1 x tube chain conveyor, 1 x mixer1 x water addition, 1 x extruder, 1 x supply air fan,1 x cyclone, 1 x rotary valve, 1 x distributor,1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor,1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag,1 x supply air fan, 1 x belt dryer, 1 x rotary valve,1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer,1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging1 x belt unit, type: BTK 1510-0refurbished 2016

Size: 0x0Equipments: Linotype-Setzmaschine

Size: Equipments:Speed: 4,300 cycles per hourFold types: Letter, Single Fold, Zigzag Fold, DoubJob Memories: 20Folding Capacity: 8 SheetsDocument Feeder Capacity: 325 SheetsMaxi Feeder: 1,200 SheetsEnvelope Capacity Hopper: 500 EnvelopesEnvelope Capacity Side Exit: 500 EnvelopesEnvelope Capacity Power Stacker: 500 EnvelopesSet Thickness: 2.5mmReverse Reading: YesCascade Feeding from all Feeders: YesHigh Capacity Power Stacker: YesDimensions: Depth: 460mm, Height: 920mm, Length: 1Dimensions: Weight: 140 Kg (6 Stations)

A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible.

A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.

Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.