post press: other used for sale (788)

Magnopro I-CUT12090 Fully automatic die-cutting + creasing of folding cartons Year of construction 2022 Connection 230 V Material thickness depending on model: 10 mm Data format PLT, DXF, HP/GL, PDF, EPS Feeder Sheet feeder for suction air/unwinding device (opt.) max. format: 90 x 120 cm Dimensions W x D x H: 320 x 150 x 115 Alignment CCD Camera System Speed up to 1000 mm/sec Positioning suction belt Programming barcode reader, QR code Accuracy +/- 0.1 mm Bow and roller feeder !

Theisen & Bonitz tb sprint 310 VP, machine number 310 VP 2784, year of construction 2001, 10 stations, format min. 65 x 100 mm - max. 350 x 500 mm, flat pile feeder, stacking height 30 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Eyelet machine Hang 103 LOK, machine number 30621, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min

Hohner Orion 4 wire stitching machine; cleaned and tested; 3 stitching heads 70/20 with coarse tool; Max. Staple thickness 20mm; Clamp spacing 70-550mm; Table size 1000x330mm. Wire stitcher Hohner Orion 4; cleaned and checked; three stitching heads 70/20 with tool rough; max.thikness 20mm; distance between heads 70-550mm; table size 1000x330mm.

Professional pallet wrapper with stretch film height adjustment Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph

1 x MX gatherer - 15 stations (3x5) : 1 x Astronic 180 book sewing machine (year 2006) 1 x Astronic 180/42 (year 2001)

Automatic Feeder Openings: 4 4 Thread break detector Computerized LAP Opener (to open signatures with overlap) with Variable speed of motors and infeed wheel Automatic book separator Belt delivery Instruction manuals, Spare parts catalogues, Electrical wiring diagrams Max size 560 x 320 mm Min size 140 x 80 mm

Multitex Folding Machine

Hand Feeding Covering Material, Hand Feeding Hard Spine Insert, Automatic Cardboard Feeding, Automatic Soft Spine Insert Feeding From Roll, Hot Glue, Format: Max. 530x400mm, Min. 110x155mm, Speed: Max. 15 Cycles/Min.

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

max. paper width: 68 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 4 drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 20 mmvoltage: 220/380 Vfrequency: 50 HzDimensions (L/W/H): 100x70x150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 30 Stk.max. speed sets: 8000 /hmax. paper size: 35x50 cmincl. BDF bookletmaker + trimmer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 0drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 14 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. moulding area: 38 x 50 cmelectrics - voltage/frequency: 230 V/HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).

number of heads: 2 drilling capacity diameter min.: 3 mmdrilling capacity diameter max.: 20 mmserial no.: 26332 voltage: 280/220 VDimensions (L/W/H): 80x120x170 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 4 mmdrilling capacity diameter max.: 12 mmserial no.: 26214 dimensions of press (L x W x H): 64 x 102 x 105 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of stapling heads: 2 voltage: 220 Vfrequency: 50 Hzdimensions of press (L x W x H): 60 x 70 x 105 cmweight: ca. 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 1 drilling capacity diameter min.: 4 mmdrilling capacity diameter max.: 12 mmserial no.: number of spindles: 1 max. speed: 2800 U / minvoltage: 220/380 Vpower required: 0,56 KWfrequency: 50 HzDimensions (L/W/H): 70x50x90 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 15 mmserial no.: 230 spindle distance: 45 - 120 mmbore depth: 50 mmHole distance: 3/380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 0drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 14 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 1 drilling capacity diameter min.: 3 mmdrilling capacity diameter max.: 10 mmserial no.: 14494 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 20 mmserial no.: 526S130 number of spindles: 2 max. speed: 2800 U / minvoltage: 220/380 Vpower required: 0,56 KWfrequency: 50 HzDimensions (L/W/H): 70x50x120 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper width: 68 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 105 x 145 cm: 16 cmserial no.: 474 voltage: 380 Vconnected load: 1,8 / 4,8 kVAwith press rollThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 14 mmserial no.: 70010 Dimensions (L/W/H): 60x105x85 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mmdrilling capacity diameter max.: 8 mmserial no.: 71479 dimensions of press (L x W x H): 185 x 110 x 80 cmbore depth: 70 mmStack height: 50 mmvoltage: 380 Vfrequency: 50 Hzweight: ca. 160 kgElectric capacity: 0,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.