[ dealer profile ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Baler 48 t with horizontal tying system HSM CO. KG
machines and plants for waste disposal and recycling / presses for recycling / Baling presses
Manufacturer: HSM CO. KG
Model:
Type of machine: Baler 48 t with horizontal tying system
item-No.: 167498176
Quantity: 1
Date: 10.07.2025
Year of manufacture:
Operating hours: 5059
Location:
Germany
DE
Price:
Seller-item-No.:HSM_VK4812_yoc_2014
Technical information baler:
Manufacturer HSM GmbH + Co. KG
Typ VK 4812
Year of construction 2014
Hours of operation 5,059 hours, stand November 2024
Press power main press 48 tons
Specific press capacity 58,2 N/cm²
Feed channel 1,250 x 1,020 mm
Theoretic cycle time 11.2 sec.
Theoretic throughput rate 332 m³/hour
Bale size 1,100 x 750 x 600 up to 1,200 mm
Driving motor 30 kW
Connected load 32 kW
Rated current 59 A
Tying system 4-fold horizontal, fully automatic
Throughput rate at a
bulk weight of 20 kg/cbm up to 6 tons/hour
bulk weight of 50 kg/cbm up to 13 tons/hour
Bale weight up to 550 kg, depends on material
SPS controller Siemens SIMATIC S7-200
Operating panel Siemens HMI Touch Panel
Filling quantity hydraulic oil tank 300 L
Oil type HVI 46
Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)
Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)
Machine weight press approx. 12 t
Scope of delivery:
Baler HSM VK 4812, without hydraulic oil, without conveyor system.
Two wire reel boxes for 8 pieces 40 kg wire reels, without wire
Bale chute
Machine documentation in German
Comments:
The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded O5751246 back for transport.
The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested.
A truck with an effective internal height of 2,800 mm is required to transport the baler. The press is loaded without hydraulic oil. The conveyor technology shown in the photos is not for sale and is not included in the scope of delivery.
The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.
Manufacturer HSM GmbH + Co. KG
Typ VK 4812
Year of construction 2014
Hours of operation 5,059 hours, stand November 2024
Press power main press 48 tons
Specific press capacity 58,2 N/cm²
Feed channel 1,250 x 1,020 mm
Theoretic cycle time 11.2 sec.
Theoretic throughput rate 332 m³/hour
Bale size 1,100 x 750 x 600 up to 1,200 mm
Driving motor 30 kW
Connected load 32 kW
Rated current 59 A
Tying system 4-fold horizontal, fully automatic
Throughput rate at a
bulk weight of 20 kg/cbm up to 6 tons/hour
bulk weight of 50 kg/cbm up to 13 tons/hour
Bale weight up to 550 kg, depends on material
SPS controller Siemens SIMATIC S7-200
Operating panel Siemens HMI Touch Panel
Filling quantity hydraulic oil tank 300 L
Oil type HVI 46
Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)
Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)
Machine weight press approx. 12 t
Scope of delivery:
Baler HSM VK 4812, without hydraulic oil, without conveyor system.
Two wire reel boxes for 8 pieces 40 kg wire reels, without wire
Bale chute
Machine documentation in German
Comments:
The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded O5751246 back for transport.
The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested.
A truck with an effective internal height of 2,800 mm is required to transport the baler. The press is loaded without hydraulic oil. The conveyor technology shown in the photos is not for sale and is not included in the scope of delivery.
The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.
Share this machine on Facebook: