general inventory used for sale (1,585)

The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...

Used checkout counter from Potrafke, left and right, good condition. Length: 300 cm Width: 140 cm Height: 88 Treadmill, approx. 128 x 45 cm Fabric tray, approx. 130 x 76 cm sawn recess (corner pillar cut-out) in the fabric tray, approx. 48 x 44 cm right-handed Taxiway Power connection: 230 V / 50 Hz without POS hardware, expansion parts and scanner We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by consumers within the meaning of § 13 BGB is to be excluded. We will be happy to send you more photos and information. Please also note our other advertisements. In addition, you will find more new and used checkout counters, used and new store shelves in various sizes on our homepage. Paints, fruit and vegetable displays, shopping trolleys and baskets, action  ...

Azelio A-SE13-1 Mini Split Air Conditioner Specifications Electrical power: 13 kW Heating capacity: Up to 50 kW Engine: Stirling, airtight, with increased pressure Heating medium: hot air or filtered exhaust gases Generator: Brushless, manufacturer ABB Built-in systems: pumps, heat exchangers, temperature and pressure sensors Starting requirements: External automation system + filling of the motor circuit with nitrogen under pressure Purpose: - Scientific research and R&D - Prototypes for CHP plants - Development of our own controls and regulations Manufacturer: Azelio Type: A-SE13-1 Dimensions: 1,030 x 720 x 1,850 mm Weight: 510kg. Year of Make: 2020 More items - new and used - can be found in our shop! International shipping costs on request!

Bakery shop equipment Aichinger ArtLine III sales counter 3.9m shop counter baked goods sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 The furnishings come from the renowned manufacturer Aichinger and are characterized by high-quality craftsmanship. The total gross order value was EUR 77,350. Properly and professionally dismantled, it is stored on pallets in our warehouse and is in very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Worktops Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price Range: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Fron ...

Vibration tester for Electronic devices.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safe for Digital Media, 10 drawers, int. 500/850/1450 ext. 850x1200x1850 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heat output capacity: NA KWair volumen: NA m³/hweight of the machine ca.: NA tdimensions of the machine ca.: NA mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Vertical GRP tanks, polyester tanks with flat bottom with slope Volume: 50,000 L Dimensions: Ø 3.00 m × 7.25 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Measuring projector with 3-axis digital display Ø 300 with base frame Ready for demonstration

Bosch Rexroth workstation 4800 x 700 x 880 mm 2 x Bosch Rexroth worktop 2400 x 700 x 40 mm Worktops with hard laminate coating suitable for high mechanical stress on the tabletop surface \u2012 Very abrasion-resistant – High impact resistance and scratch resistance – Resistant to organic solvents, weak acids and alkalis, gasoline and oil – Short-term resistant up to 180 °C 3 x Lista Drawer Cabinet Number of drawers: 5 1 x 50, 2 x 100, 1 x 150, 1 x 300 mm Width outside: 560 mm Depth outside: 720 mm Exterior height: 840 mm More items - new and used - can be found in our shop! International shipping costs on request!

Standing stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³ Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground for various purposes Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 10 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Fire Brigade Rescue Kitz, Rescue Scissors, Spreader Condition see photos.

Machine vise – tilting, rotatable

Machine vise prismatic

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: Weishaupt Type: WM-G20/3-A Number of pieces: 2 pcs. Year of construction 2019 Power: 2000 kW Location: Wuppertal

Crimping Tool DMC Crimping tool for turned contacts Insert M 22520 / 1 - 01 only 1169 - 2 left

Crimping Tool DMC Crimping tool for turned contacts MS 3198 - 1

Measuring column Length - height 3,000 mm Diameter 190 mm Special steel - hard chrome plated - piston rod of a hydraulic cylinder Support leg - 2,500 mm Weight approx. 560 kg

Measuring tripod - heavy duty version Measuring height 290 mm Measuring range transverse arm 260 mm Diameter of measuring column 40 mm Cross arm diameter 28 mm Base plate 500 x 235 mm Base plate thickness 35 mm Weight approx. 38 kg

Lifting spindle drive Framo - Drive technology 3 units in stock Stroke 1,500 mm Adjustment force 4,000 N Lifting speed 5 mm/s -New- -Unit price- Original price today approx. € 6.300,00 net per piece

Centering device CENTRICATOR Scanning range inside 6 to 220 mm Scanning range outside 0 to 150 mm Scanning range plan 90 to 280 mm Clamping Shank SK 40 Weight approx. 2.4 kg

Measuring table Table size 140 x 130 mm Table height 100 mm max. measuring height 230 mm max. projection 115 mm Column diameter 50 mm Weight approx. 13.5 kg

Chip vacuum cleaner NILFISK Input power 3.6KW - 3 x 1.2 KW Tank capacity 213 litres Payload 300 kg Negative pressure 22,000 Pa Air flow rate 100 L /sec Suction hose 50 mm Electrical values 220 V/ 3.6 KW Platzbdearf W - 900 x D - 1100 x H - 1900 mm Weight approx. 150 kg

Power test chamber with transformer transformer Input - primary 400 V three phases Output - Secondary Switchable - 230 V three phases - 400 V three phases - 525 V three phases - 660 V three phases Power 50 KVA Space requirement W - 800 x D - 400 x H - 2,000 mm Weight approx. 430 kg

T - Slot Plate Field - Test Field Total area approx. 33.54 m² 6 plates 2,000 x 1,290 mm T - groove width 30 mm Thickness of the plates 95 mm Weight approx. 1,700 kg / plate - Price per panel -