Galvanising line ESMECH LTD 650-1250 MM, 015-0.60 MM

Qty. 1 Second-hand galvanising line
Mfc.: ESMECH Equipment Ltd Built: 2016
Material: Cold Rolled Low Carbon Steel, Unannealed / FH
U.T.S: 40 – 80 kg/mm2 Unannealed Strip
Strip Width: 650 – 1250 mm Thickness for GL: 0.15 mm - 0.60 mm
Incoming Coil Data ID: 508 / 610 mm OD: 1000 - 1900 mm Weight: 25 T
Incoming Strip Surface Condition Oil Amount: 100 - 400 mg/m2 both side max.
Iron Fines: 50 mg/m2 per side max. Scale or Rust: None
Incoming Strip Shape: Flatness, crossbow and camber to JIS G 3141
Outgoing Coil Data Grades: Full hard & CQ
Coating: 70 to 200 gm/m2 (both sides) – Aluzinc
Coil ID: 508 mm / 610 mm (rubber sleeve) OD: 1000 - 1900 mm Weight: 25 T
Type of the Line: Non-Ox Annealing Furnace type Continuous Metal Coating Line
Process Speed: 150 m/min Entry/Exit Speed: 180 m/min
Furnace capacity: 17.7 MT/hr max
Net available working hours: 7200 working hrs/year
Production Capacity: 127,170 TPA (based on ref. size of 0.20 x 1250 x 150 m/min., 17.7 TPH
Utility data to be provided by Buyer at battery limit (+1200 mm at nearest building column)
Total connected load: 2000 kW for Terminal Equipment 100 kW for Welder
1115 kW for Furnace 2400 kW for Ceramic Pots
Power supply: 380 ± 10% V, 3 ph., 50 ± 3% Hz, 4 wire system
Compressed air: 35 m3/hr FAD Normal Load; 6 kg/cm2
Recirculation Water: 50 m3/hr Recirculating at 32 °C & 6 bar
Demineralised Water: 3 m3/hr Steam: 5000 kg/hr approx. at 3.5 bar
Scope of supply: Coil Storages Coil Cars Un-coiler Peelers Shear Units
Overlap Seam Welders Strip Clamping Units Bridles Steering Units
Tanks Tensiometer Annealing Furnace Ceramic Pot & Pre-Melt Pot
Skin Pass Mill Tension Leveller Scrap Disposal Unit Recoiler

seller offer No. resale GALVANISINGL260601