[ dealer profile ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
DMG GILDEMEISTER TWIN 102 CNC Turning-Milling Center
metal working machines / milling machines / Other Milling Machines
Serial number: 07400003691operating hours read: 88,040Spindle hours read: 43,558Spindle speed range: 3200/5000 rpmRotation diameter: 270 mmTurning diameter: 120 mmSpindle distance: 900 mmTravel X1: 290 mm TravelZ1: 650 mmTravel X2: 180 mmTravel Z2: 650 mmTravel Y1: +- 40 mmTravel Z3: 670 mm ...
Manufacturer:
Model:
Type of machine: DMG GILDEMEISTER TWIN 102 CNC Turning-Milling Center
item-No.: 169620557
Quantity: 1
Date: 02.06.2026
Location: 97944 Boxberg
Auction start price: 19900 EUR
Auction Price: 19,900 EUR
Seller-item-No.:d6c7b81b-7b4f-4c47-84cb-3c2de8a7bab6
Go to auction:
End of auction: 25.06.2026 - 15:00
Serial number: 07400003691
operating hours read: 88,040
Spindle hours read: 43,558
Spindle speed range: 3200/5000 rpm
Rotation diameter: 270 mm
Turning diameter: 120 mm
Spindle distance: 900 mm
Travel X1: 290 mm Travel
Z1: 650 mm
Travel X2: 180 mm
Travel Z2: 650 mm
Travel Y1: +- 40 mm
Travel Z3: 670 mm Travel
X3: 175 mm
Max. rod diameter: 100/104 mm
Spindle bore diameter: 118 mm
Rapid traverse speed X- and Z-axis: 30 m/min
Rapid traverse speed Y-axis: 15 m/min
Number of driven tools per tool carrier: 12
Control: SIEMENS SINUMERIK 840 D POWERLINE
incl. chip conveyor
with 2 tool turrets - each with 12 tool positions
main and counter spindles, as well as foot switches
Attention, the machine has the following defects:
-the B-axis is defective (sits on turret 1)
-the guides and drives are worn according to their
age-X2 axle (guide rails) runs a bit crooked
in the range of 0.03 mm (would have to be remeasured), sporadically the setting of the reference values of the axes in the control system does not
work-the hydraulic pump was replaced by a replacement pump after a failure and is now a separate device outside the machine
Reference: Bilstein - Lot 2
Auction-ID: A7-46763-306
operating hours read: 88,040
Spindle hours read: 43,558
Spindle speed range: 3200/5000 rpm
Rotation diameter: 270 mm
Turning diameter: 120 mm
Spindle distance: 900 mm
Travel X1: 290 mm Travel
Z1: 650 mm
Travel X2: 180 mm
Travel Z2: 650 mm
Travel Y1: +- 40 mm
Travel Z3: 670 mm Travel
X3: 175 mm
Max. rod diameter: 100/104 mm
Spindle bore diameter: 118 mm
Rapid traverse speed X- and Z-axis: 30 m/min
Rapid traverse speed Y-axis: 15 m/min
Number of driven tools per tool carrier: 12
Control: SIEMENS SINUMERIK 840 D POWERLINE
incl. chip conveyor
with 2 tool turrets - each with 12 tool positions
main and counter spindles, as well as foot switches
Attention, the machine has the following defects:
-the B-axis is defective (sits on turret 1)
-the guides and drives are worn according to their
age-X2 axle (guide rails) runs a bit crooked
in the range of 0.03 mm (would have to be remeasured), sporadically the setting of the reference values of the axes in the control system does not
work-the hydraulic pump was replaced by a replacement pump after a failure and is now a separate device outside the machine
Reference: Bilstein - Lot 2
Auction-ID: A7-46763-306
Share this machine on Facebook: