Edge gluing machines BRANDT/FEMATEC Ambition 1660 FGC

Aggregate equipment:
- Joining milling unit 2 x 2.2 Kw 200 Hz
- Gluing unit
- Cross-cut unit chamfer/straight 2 x 0.35 Kw
- Milling unit 2 x 0.55 Kw counter rotation
- Grooving unit 1 x 3.5 Kw
- Shape milling unit 2 x 0.35 Kw Wd 60
- Profile scraper blade with quick-change heads (R 1 and 2 mm)
- Glue joint scraper blade
- Buffing unit

Other features:
- Extended inlet ruler with program adjustment
- Program adjustment pressure zone
- Motorized adjustment upper pressure
- PU top pressure rollers
- Automatic edge retraction
- Quickmelt application unit
- Pneumatic 2-point adjustment caps
- Pneumatic adjustment of the scraper blade
- Program adjustment side buttons
- Pneumatic 2-point adjustment, vertical sensing rollers
- Release agent spray unit workpiece
- Lubricant spray unit edge material
- Cleaning agent spray unit
- Axis adjustment for groove milling machine, motorized
- Multi-roller scanning fine milling machine
- Special keying profile scraper blade
- PowerTouch2 control system
- Pre-installation Airtec
- Workpiece support in scissor design

Including Fematec PU premelting unit (2 PU premelters)

Workpiece parameters:
- Workpiece width min:
- For workpiece thickness 8 -22mm | 70 mm
- For workpiece thickness 23-40mm | 120 mm
- At workpiece thickness 41-60mm | 150 mm
Depending on the workpiece length
- Workpiece protrusion | 38 mm
- Workpiece thickness | 8 - 60 mm
- Edge height max.= workpiece height| + 6 mm
- Edge material roll | 0.4 - 3 mm
- Edge cross-section max.
- For PVC | 135 mm²
- For veneer | 100 mm²
- Roll diameter max. | 830 mm
- Strip edge material | 0.4 - 12 mm
- Edge cross-section max.
- For strips | 600 mm²
seller offer No. resale -04601190374