[ dealer profile ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Baler 100 t with 5-fold tying system BOLLEGRAAF RECYCLING SOLUTIONS
machines and plants for waste disposal and recycling / presses for recycling / Baling presses
Manufacturer: BOLLEGRAAF RECYCLING SOLUTIONS
Model:
Type of machine: Baler 100 t with 5-fold tying system
item-No.: 168368382
Quantity: 1
Date: 05.12.2025
Year of manufacture:
Operating hours: 34480
Location:
Netherlands
NL
Price:
Machine in stock:Yes
Seller-item-No.:Bollegraaf_HBK100_yoc_2004
Technical data baler:
Manufacturer Bollegraaf
Typ HBK 100
Year of construction 2004
Hours of operation 34,480 hours
Press power main press 100 tons
Press power of pre-press max. 42 tons
Feed channel 1,600 x 1,100 mm
Filling volume 3.15 m³
Theoretic cycle time 22 sec.
Theoretic throughput capacity up to 450 m³/hour
Bale size 1,100 x 720 mm, lenght variable
Driving motor 45 kW
Connected load 60 kW
Tying system 5-fold vertical, fully automatic
Throughput rate at a
bulk weight of 30 kg/cbm approx. 13 tons/hour
bulk weight of 50 kg/cbm approx. 20 tons/hour
bulk weight of 100 kg/cbm approx. 30 tons/hour
Throughput rate with ruffler approx. 20 tons/hour
Bale weight 550 up to 750 kg, depends on material
Volume hydraulic oil tank 750 l
SPS controller Telemecanique TSX Micro
Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h)
Machine weight baler approx. 19 tons
Comments:
Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the O51251246 material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction.
The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Manufacturer Bollegraaf
Typ HBK 100
Year of construction 2004
Hours of operation 34,480 hours
Press power main press 100 tons
Press power of pre-press max. 42 tons
Feed channel 1,600 x 1,100 mm
Filling volume 3.15 m³
Theoretic cycle time 22 sec.
Theoretic throughput capacity up to 450 m³/hour
Bale size 1,100 x 720 mm, lenght variable
Driving motor 45 kW
Connected load 60 kW
Tying system 5-fold vertical, fully automatic
Throughput rate at a
bulk weight of 30 kg/cbm approx. 13 tons/hour
bulk weight of 50 kg/cbm approx. 20 tons/hour
bulk weight of 100 kg/cbm approx. 30 tons/hour
Throughput rate with ruffler approx. 20 tons/hour
Bale weight 550 up to 750 kg, depends on material
Volume hydraulic oil tank 750 l
SPS controller Telemecanique TSX Micro
Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h)
Machine weight baler approx. 19 tons
Comments:
Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the O51251246 material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction.
The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Share this machine on Facebook: