beverage machines used for sale (2,236)

New glass depalletizer KHS type: Innopal Lord II ASN year of manufacturing: 2000 capacity. 30.000 bph with Siemens S 7 electric, incl. pallet transport and pallet magazine incl. sheet layer removal system The machine is depalletizing the empty bottles on a height at approx. 1.150 mm.

Capping heads KRONES for plastic screw caps Pick-and-place PCO 28 - 1810 like new

FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

Palletizer robot for depalletizing, make Kettner, type: Robogrip, with operating desk, control cabinet in s/s with Siemens Simatic S7 control, built 1999

Palletizer robot for palletizing, make Kettner, type: Robogrip, with operating desk, control cabinet in s/s with Siemens Simatic S7 control, built 1999

Sheet filter, make Schenk, type: 60x60, for about 30 hl/h, with stationary filter rack, with planetary gear, fit out with 59 filter plates in stainless steel, 2 endplates, with outside lying raising pipes, 2 sight glass armatures with pressure manometer, frame length: ~3,0m

Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.

Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2003 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.

Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2002 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet

Mixer Falterbaum Typ Famix 20000 Capacity: 20.000 ltr./h year of manufaturing: 1992 with Bran & Lübbe dosing pump incl. switch board The machine is mounted on a stainless steel base plate

Crowner KOSME with 8 closing heads work direction: left to right year of manufacturing: 2013 capacity: 4.000 - 12.000 bph the machine will be complete recondition incl. - new electrical panel with Siemens frequency inverter - new safety housing

Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system

High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

Several packers Joha in stock: GEP-034-ZW Packer, Fabr. Joha, type: diamond, 1 head, set up on 0.5 lt NRW and 0.33 lt longneck bottles in 20 NRW boxes, built in 1999. GEP-036-WN Packer, Fabr. Joha, type: diamond, 2-head, longitudinal, set up on 20 module box, with Siemens S5 control, YOC 1989 GEP-040-BS Packer, Fabr. Joha, Type: Diamant 2, 2-head, for 0.33 lt bottle and 0.5 lt bottle in box of 20, YOC 1995 Pictures and prices on request.

several unpackers, Joha Diamant in stock: CAP-033-ZW Unpacker, 1 head, set up on 0.5 lt NRW - + 0.33 lt Longneck in 20er NRW boxes, built in 1999 GAP-035-WN Unpacker, 2-head, longitudinal, set up on 20 module box, with Siemens S5, built in 1993 GAP-039-BS Unpacker, 2-head, for 0.33 lt and 0.5 lt bottle in box of 20, YOC 1995 Prices and details on request

Automatic depalletizer for glass bottles Capacity: 15,000 bottles/hour for 330-500 ml User-friendly and customizable software for every requested product and every need. Minimal downtime: Our depalletizer can be quickly adapted to new products, size changes or product types. Semi-automatic "push" depalletizer for pallets with layers of glass bottles, cans or other types of containers with two-column gantry structure, mobile centering device, intermediate table and transfer trolley. On request, our machine can work fully automatically, which leads to a high production rate. The machine includes; Layer movement unit Pallet conveyors (motorized) Fuse box HMI – Keyboard and display with auto-programming functions Pneumatic system Protective grilles (metal nets) Equipment Operating status of the machine Technical Documentation The devices are compliant with and compl ...

Stainless steel machine Capacity: approx. 300 boxes/h

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

It has 3 units, built in 1998