horizontal vacuum furnace AMP VBF-60/60/100-1.5

0: 1180 °C AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation.

The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a separate control cabinet. The total weight of the VBF-60/60/100-1.5 machine is 10000 kg.

Technical data of the AMP VBF-60/60/100-1.5 furnace
- power: 230 kW
- gross charge weight: 600 kg
- useful dimensions of working chamber (L x W x H): 600 x 600 x 1000 mm
- nominal temperature: from 1180°C
- temperature adjustment: single-zone
- temperature adjustment accuracy: ± 6°C
- minimal chamber heating time M5751405 to nominal M5751405 temperature: approx. 60 min
- atmosphere: vacuum-nitrogen
- vacuum pump capacity: 200 m3/h
- vacuum pump motor power: 4 kW
- Roots WVC-1200 pump capacity: 1115 m3/h
- Roots WVC-1200 pump motor power: 4 kW
- thermal insulation: matt + graphite foil = ~55 mm
- heating element material: isostatically pressed graphite
- heating elements power: 150 kVA
- blower motor power: 37 kW
- pressure: 0,15 Mpa
- power supply: 3x 230/400 V; 50 Hz
- control cabinet
- control cabinet weight: 300 kg
- weight of the VBF-60/60/100-1.5 machine: 10000 kg
seller offer No. resale 162405292