Baling presses ABBA Albamat 800 V5 A

Hello,
We hereby offer you a complete, used baling system, consisting of an 80 t baling press, including conveyor technology, wire pulling stations and bale chute.

Technical data press:
Manufacturer abba-Pressen Vertriebs GmbH & Co KG
Type Albamat 800 V5 A
Year of construction 2019
Operating hours 2,687 h
Press force main press 80 t
Specific pressing force 98 N/cm"
Dimensions of the insertion tray 1,140 x 1,470 mm (L x W)
Theor. Cycle time 13 s
Theor. Throughput 314 m³/h
Throughput under operating conditions 188 m³/h
Bale dimensions 1,080 x 750 x 1200 mm (W x H x L), length variable
Drive power 60 kW
Electrical connection CEE plug 63 A / IP67
Bonding 5-fold vertical, fully automatic
throughput capacities with a
Bulk density from 35 kg/cbm (B19) to approx. 7 t/h
Bale weights with a bale length of approx. 1.2 m from 450 – 650 kg/bale
Transport weight press 13 t

Machine equipment:
Cutting edge free kick, oil cooler as well as tank and control cabinet heating as basic equipment.
Bottom and piston slider to cover the needle opening (prevents the setting unit from being contaminated by plastic particles etc.)
Channel adjustment 3-sided, hydraulic-automatic, 4 working cylinders
4 pieces of retaining clamps to retain expanding material in the press shaft
Photocell control in the filling chute
Hook lift mount according to DIN

Condition of the press:
The system is immediately ready for use, in good condition, but there are a few cracks in the backpressure duct. These should be welded and turned reinforced. On request, these services can be provided on site after dismantling.

Scope of delivery for the baler (insertion hopper, intermediate hopper, wire pulling stations, bale chute, spare parts, etc.)
1 piece chain belt conveyor belt with pit cover, gooseneck and insertion funnel
1 piece baler abba Albamat 800 V5 A
1 piece bale chute
2 pieces of wire drawing stations for 2 x 5 wire rolls (without wire)

Technical data of the conveyor belt
Manufacturer unknown
Type unknown
Year of construction unknown
Drive power 5.5 kW
Belt speed 12 m/min.
Length of feed conveyor 4.65 m
Length of climbing strap 9,550 mm, without gooseneck
Incline 35°
Belt width 1,400 mm
Height of side wall feed conveyor, inside 500 mm
Height of sidewall riser strap, inside 800 mm

Condition to conveyor belt:
The conveyor belt is ready for use and in a satisfactory condition from the wear. Due to the lack of a nameplate, no information on the manufacturer, type and year of manufacture can be provided.

Remarks:
The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is completely available. A viewing is possible by appointment. We assume no liability for the technical information or any errors.

seller offer No. resale abba_Albamat_800V5A