Wire Cutting Spark Erosion Machine Tools used for sale (40)

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

Auction-ID: A1-45711-140

Wire EDM machine Fanuc alpha IB BJ 2002

Serves only as a spare parts donor! Auction-ID: A1-45711-306

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

Jitem P-50 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Jitem Model: P-50 X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Approx. dimensions (L x W x H): 2220 x 2300 x 2150 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-29

The machine is in good technical condition, after prior agreement it is possible to test it. , connected = can be demonstrated in operation. Machine system completely backed up on ext. HDD. Disconnection, reconnection and possibly future service agreed with EDM (exclusive importer and seller)

Cleancut EDM650 CNC Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Cleancut Model: EDM650 CNC Year of manufacture: 1999 Serial number: 904669 Electric connection: 380 V / 50-60 Hz Amps: 150 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-17

The machine is in good technical condition, testing is possible after prior agreement. Machine on - 92331 h

Charmilles Robofil 510 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Charmilles Model: Robofil 510 Year of manufacture: 1995 Workpiece weight max.: 300 kg Electric connection: 380 V Approx. machine weight: 3350 kg Table dimensions: approx. 700 x 500 mm Maximum workpiece height: approx. 310 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-5

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Clean CUT SA-600 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Clean CUT Model: SA-600 Year of manufacture: 2001 X-axis travel: 610 mm Y-axis travel: 630 mm Z-axis travel: 350 mm Dimensions: approx. 1900 x 1900 x 2700 mm Table: 950 x 500 mm Transport dimensions: approx. 1900 x 1900 x 2700 + 1 pallet Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-10

EDM machine Makino DUO64 vintage 2011.

CONTROLS  CNC controls WORKING RANGE -WIRE CUTTING-  X-axis travel: 500 mm  Y-axis travel: 350 mm  z-axis travel (vertical): 426 mm  conical operation for max.: 30 °  U-axis travel: 140 mm  V-axis travel: 140 mmWIRE SYSTEM  wire diameter (min): 0.15 mm  wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1940 mm  space requirements -front/back-: 2300 mm  total height: 2600 mm  total weight approx.: 4200 kg

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

Key data: 300 mm, 200 mm, 200 mm

Specifications: Manufacturer: Sodick Type: AQ 300 L (5 axles) Year of Make: 2005 Control: Sodick LN1W Travel distances X, Y, Z: X 300 mm, Y 200 mm, Z 200 mm Travel distances U, V: U 80 mm, V 80 mm Workbench Dimensions: 750 x 500 mm Max. workpiece height: 200 mm/180 mm Max. table load: 300 kg Dimensions and weight Dimensions L/W/H: 2,400 x 1,300 x 2,210 mm Weight: 2,700 kg Condition Condition: Used Functional: Tested and fully functional The machine is in very neat condition.

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor N181, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power

Working range: 1.050 x 650 x 250 mmmax. workpiece weight: 400 (800) kgcontrol: Agievision AGIEmax. conicity: 30° / 100mm travel -x axis: 500 mmtravel -y axis: 350 mmtravel -z axis: 426 mmtravel U x V-axis: +/-70 / +/-70 mmrapid traverse X-axis: 3 m/minrapid traverse Y-axis: 3 m/minrapid traverse U-axis: 0,6 m/minrapid traverse V-axis: 0,6 m/minrapid traverse Z-axis: 0,6 m/minwire dia.: 0,2...0,33 mmtotal power requirement: 12,1 kVAweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mDocuments: Wire Eroding MachineAGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

x-axis: 550 mmy-axis: 350 mmz-axis: 400 mmU-axis: 550 mmV-axis: 350 mmvolume: 1200 Linclination: +/-30°/400 mmdimensions: 1200x700x400 mmweight: 1500 kgwire dia.: 0,10-0,33 mmBobbin Weight max.: 25 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

table length: 500 mmtable width: 350 mmampere: 65 AControl: AGIEVISION 5 CNC total power requirement: 20 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mA G I E (Switzerland)CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007Working range, X Y Z (=height) 500 x 350 x 426 mmWire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mmResolution of axes 0.0001 mmSpeed for positioning the axes up to 3 m/Min.Tolerances (If machine is new) 4 µWorkpiece dimensions, L x W x H max. 1.050 x 650 x 420 mmMax.weight of workpiece with/w.o. Dieelektricum 400/800 kgClamping System Universal Beams with fixing holesCutting wire Ø  ...

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

Key data: 600 mm, 400 mm, 310 mm

A Mitsubishi MV2400R is being sold Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V axis: +/- 75 mm Type: 4-sided frame table hardened with automatic adjustment Vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece sizes: max. 1050 x 820 x 305 mm Workpiece weights: max. 1500 kg Wire ̄: 0.1 to 0.3 mm for wire coil holder 10 kg Control: MITSUBISHI M800 with 19" Full-Touch Monitor (incl. hand pilot with configurable LCD monitor) Closed control loops min. axis resolution 0.05 μm Generator: Fine finishing generator H-FS AE II Digital Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Hand-held pilot with configurable LCD monitor 20-kilo wire station Angle Master Advance II Set Wear parts box Ergolux Lamp Corehold function Job Planner Filter Pump Pressure Sensor Operating data output Free software update if needed  ...

Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

Adaptor for A-axis HSK63-B,F For manual and automatic loading. Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

Control Fanuc Series 180iS-WB Travel: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, max. workpiece weight 500 kg, Kdswswl Hiiovu Nu Iol Machine weight 1,700 kg, Power supply 13 KVA Machine can be viewed under power.

travel -x axis: 450 mmtravel -y axis: 300 mmtravel -z axis: 320 mmtravel -u axis: +/- 50 mmtravel - v: +/- 50 mmcontrol: MGW-S3 positioning accuracy: +/- 0,015 mmrepeatability: +/- 0,015 mmtable dimension (L x W): ~ 580 x 730 mmmax. size of workpiece LxWxH: ~ 730, 580, 300 mmmax. workpiece weight: ~ 800 kgOverall size: ~ 3.100 x 3.100 x 2.300 mmweight of the machine: ~ 3.400 kgWire Eroding Machine | MAKINO - EU43The machine is in a well-maintained condition.Please note that the technical detailswere added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: EU 43 | EU-43The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

movement of X-axis: 500 mmmovement of Y-axis: 350 mmvert. movement Z-axis: 256 mmworkpiece weight max.: 800 kgweight of the machine ca.: 4.5 t: +/- 70 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

x-axis: 350 mmy-axis: 250 mmz-axis: 256 mmU-axis: +/-70 mmV-axis: +/-70 mmdimension of workpiece: 750x550x256 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee