Single shaft shredders used for sale (18)

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

Holzzerkleinerer ( Holzhäckler ) maschine modell MION MOSOLE TR 2 gebrauchte maschine Maschinenbedienung im Automatik- und/oder Handbetrieb modus Arbeitsbedingungen: ausgezeichnet Im Automatikbetrieb startet der Motor in die entgegengesetzte Richtung, um den Stopfer von eventuellen Rückständen vorheriger Arbeiten zu befreien. Im Vollautomatikbetrieb stoppt der Motor nach ca. 5 Sekunden und startet erneut in die richtige Richtung für eine kontinuierliche Bearbeitung (siehe Video). Technische Daten : hydraulischer Schieber Breite Rotor mm.700 Durchmesser Rotor mm.300 Drehzahl Zerkleinerungseinheit 100 U/min Trichterinhalt 3.42 m³ Hauptmotor PS 25 Hydraulikaggregat Motorschieber PS 1 auswechselbare Messer Beschickung von oben

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

The robust single-shaft shredder is equipped with 7 offset 40/40 mm indexable blades on the rotor The extremely robust design allows the shredding of data carriers such as hard drives, etc., files with metal components, wood-metal mixed material, metal-plastic material, recycling material, textile and carpet, rubber waste, horse manure, etc., sheep's wool, compost, etc. Technical data: 1 rotor with 7 offset indexable blades 40/40 mm 1 profiled counter blade 1 interchangeable screen perforation 20 mm round (can be adapted as required) Feed width 366 mm Rotor diameter 330 mm Motor 7.5 kW, 3x380 V, 50 Hz (can be made stronger) Speed approx. 580 rpm (a gearbox can be set up for low speeds) Machine new Information from Peter Ari Schär from MATEC Changes, errors, prior sale reserved ! Manufacturer: MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse ...

Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...

Single shaft shredder with 1350 mm shaft, hopper 1350 x 1100 mm, motor 37 kW, all bearings new. Extremely robust construction. Slow runners.

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

Single Shaft Shredder "Obsolete" Propulsion: 37kW Hydraulics: 1.5kW Rotor diameter: approx. 400 48 rotor blades 3 stator knives Incl. segment floor

used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg

We offer you a semi-mobile Maier crusher. This used to shred wood, paper, etc. The counter cutting edge was converted with gas pressure cylinders to rise in case of faulty parts (such as Büffel Doppstadt). The machine is mounted on a semi-mobile steel frame to be manoeuvred on the premises. Currently, 90 KW of electrical power are installed. However, the gearbox can absorb up to 250 KW of power.

GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...