Moulders used for sale (20)

TECHNICAL DATA: Length of inlet planer: 1950 mm Working width: 240 mm Working height: 180 mm Spindle: Ø 40 mm Number of Spindles: 6 Drive via cardan shaft Grooved contact surface Speed: 8000 rpm Installed power: 41 kW Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) 3: Left (5.5 kW) 4: Top (7.5 kW) 5: Top (5.5 kW) with PowerLock HSK 6: Bottom (5.5 kW) EQUIPMENT: Complete with milling cutters Complete with cabin

Weinig Quatromat 23 4-side Profiling machine Specifications:: Manufacturer: Weinig Type: Q23P (Kehlautomat) Year: 2003 M-Nr.: 99567 Video link:

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall ...

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 110 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive Installed power: 16 kW Voltage: 380 V Spindle configuration: I bottom: 3.7 kW II right: 5.5 kW III left: 5.5 kW IV: top: 5.5 kW

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)

Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000