Cutting-To-Length Lines used for sale (15)

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

sheet width: 1000 mmplate thickness: 125 mmno. of strokes: Hub/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BUD-MASZ slitting and cut-to-length line was built in 2011 in Poland by P.W. BUD-MASZ MACIEJ STACHLEWSKI. The system enables the precise cutting of material with a maximum thickness of 2.5 mm into both sheets and strips of equal width. The entire process is performed fully automatically. The material is uncoiled gradually towards the workspace, inside which there are, among others, high-quality roller knives and a transverse guillotine. The use of these components guarantees the highest cutting precision with optimum utilisation of the raw material. Once the cycle is complete, the sheets are taken out of the workspace by means of a lift table. In the case of slitting, the finished strips of material are wound back onto the coils. All this makes the offered BUD-MASZ slitting and cut-to-length line the best choice for any industrial plant. The coil slitting line is fully complete and co ...

CONTROLS  PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thickness min.: 2 mm  number of leveller rolls: 9   diameter of leveller rolls: 56 mm &n ...

BUD-MASZ slitting and cut-to-length line was built in 2005 in Poland by P.W. BUD-MASZ MACIEJ STACHLEWSKI. This system enables precise cutting of material into both sheets and strips of equal width. Material with a maximum thickness of 2 mm is uncoiled gradually towards the workspace, inside which there are, among others, high-quality roller knives and a transverse guillotine. Cutting is performed by means of reliable components, which guarantee the highest cutting precision with optimum utilisation of the raw material. Once the cycle is complete, the sheets are taken out of the workspace by means of a lift table. In the case of slitting, the finished strips of material are wound back onto coils. The BUD-MASZ slitting line weighs 45 tonnes. The coil slitting line is fully complete and consists of the following components: 1. mechanical sheet metal decoiler 10 t 2. coil lift table 10  ...

Key data: 2 mm, 12 mm

Cut-to-length line 2,000 x 12 mm Bandwidth. 2,000 mm Tape thickness... 4-12 mm Coil weight 30 tons. Straightener 11 reels Speed 15 m/min. Main Engine. 200 KW Voltage. 380 V / 50 Hz.

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Key data: 1250 mm, 1 mm

Simple cut-to-length line with hand-held pull shears Automatic feed with measuring system Function checked !

Key data: 2 mm

Strip width 1,500 mm, strip thickness 0.5-2.0 mm, number of straightening rollers 6 pcs., feed rollers 2 pcs., coil weight 3,000/ 5.000 kg., longitudinal shears 4 cutting heads manually adjustable, min. width 100 mm electric control new, Hasp can be used as both an unwinding and rewinding reel. Appendix cpl. Outdated, i.e. new.

Key data: 2 mm

Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.

Key data: 2 mm

Bandwidth... 1,550 mm Strip thickness 0.5-3.0 mm Coil weight. 15,000 kg Coil I Diameter 508 mm Coil A Diameter... 1,600 mm Straightening rollers 23 pcs. Execution. 6 high Stainless steel / aluminium

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet ...

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system