EATON pk used machines

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-1 XTPR001BC1 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.

Hydraulic Cylinder EATON, HYDRO-LINE HR5F-2X4-N 1-2-N-V-V-1-1 HAHA2X4-N-Br / 02KR J081 210037 rod diameter: Ø 25 mm stroke: 100 mm pmax: 100 bar New !' Dimensions: 310 x 105 x 65 mm

* General * SKU258S235 * LocationBarneveld * MakeEaton Technologies GmbH (D) * Type16/3x3/FH01K * No.1026491 * Year of construction2013 * Pressure * Working pressure10 Bar * Main Features * MaterialStainless steel * Specified Features - Horizontal plate filter * Plate filtercheck * Horizontalcheck * Liquid outletdia. 50mm * Max. temperature-10/140 degr. C * Horizontal plate filters * InletDN 50 (2x) * OutletDN50 (3x) * MaterialStainless steel 1.4404 (316L) * Information * Mounted on legscheck * Weight800 Kg * CEcheck * Floorspace1,2x 1,2 M * Total height1,8 M * Extra Specificationsbarrel content 806 ltr : without filters Horizontal plate filtersEatonFilters > Horizontal plate filtersBrand > Eaton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

* General * SKU397X1153 * MakeEaton * LocationBarneveld * CEcheck * TypeVMDE-0402-AC10-100DX-22SEN-M * Pressure * Working pressure10 Bar * Vacuum possiblecheck * Main Features * MaterialStainless steel * Volume85 Ltr. * Surface0.16 m2 * Specified Features - Candle filter * Candle filtercheck * Filter surface± 0,4 m² (1,6 m ²) * Number of candles4 * Candle sizesø 200 x 659 * Cake capacity185 l. * Liquid outletDN100 * Max. temperature— 10 / 160 °C * Top connectionsDN100 * Vessel sizesø 550 x 800 mm * MaterialStainless steel 1.4571 (316Ti) * Candle filters * Capacity185 l. * Max. temperature-10°C/+160°C * Number of bags4 * Information * No.V1586.3 * Year of construction2017 * Mounted on legscheck * Weight220 kgCandle filtersEatonFilters > Candle filtersBrand > Eaton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready fo ...

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors -Eaton: switch disconnector/rotary handle NZM N3-AE400/NZM XDV -Rotary drive with: extension -Price: per piece -Number: 2 pieces -Dimensions: 460/185/H525 mm -Weight: 11.5 kg/piece

Control relay, control relay extension, relay output, compact control -Manufacturer: Eaton, control relay compact control -Type: easy 412-DC-R -Number: 1x relay available -Price per piece -Dimension: 90/70/60mm -Weight: 0.2 kg/pc.

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: Eaton, ON-OFF load break switch with housing -Type: P1-25 -Number: 42x main switches available -Price: per piece -Dimensions: 230/100/H115 mm -Weight: 0.5 kg/pc.

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Eaton, NH fuse switch disconnector 160 A -Type: GSTA00-160 NH00-160A -Quantity: 1x load break switch available -Dimensions: 170/105/H850 mm -Weight: 0.7 kg

Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD

Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 365/150/H150 mm -Weight: 23 kg

Hydraulic motor, oil motor, hydraulic pump -Motor: unused -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 3x motors available -Price: per piece -Dimensions: 340/145/H145 mm -Weight: 20 kg

Hydraulic motor, oil motor, hydraulic pump -Motor: unused -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 62 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 360/150/H150 mm -Weight: 23 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of GSL (German Standard Lift) work platforms -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 11 motors available -Price: per piece -Dimensions: 175/170 mm -Weight: 6.5 kg/piece

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000