DESMA 968 used machines

This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information.

BRAND: KLOECKNER DESMA YEAR: 2010 MODEL: 968.250 ZO PRODUCTION HOURS: 27676 APPLICATION TYPE: INJECTION MOULDING LOCATION: POLAND MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 8000 KG CONTROL UNIT BRAND: DESMA MODEL: DRC 2010 INJECTION UNIT INJECTION PRESSURE: 1730 BAR CLAMPING UNIT CLAMPING FORCE: 2700 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HEATING PLATES SIZE: 630 MM X 560 MM - INJECTION VOLUME: 2000 CM3 - EJECTOR ON FIXED PLATE - EJECTOR ON MOVABLE PLATE - OPTIONS INCLUDED: 2 EJECTORS VACUUM PUMP QUALITATIVE MACHINE BENEFITS: - THE MACHINE IS IN VERY GOOD CONDITION AND READY FOR TESTS. FULL DOCUMENTATION AVAILABLE.

clamping force: 2700 kN injection volume: 3300 cm³ screw diameter: -- mm platen size: 780 x 670 mm Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition 6 months in use clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 8,185 hours ...

clamping force: 2700 kN injection volume: 3300 cm³ screw diameter: -- mm platen size: 780 x 670 mm Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused! clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 395 hours  ...

Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine.

Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible.

Tool case, tool box, plastic tool box, tool trolley -Manufacturer: Stanley, plastic tool box tool trolley type 1-93-968 -3 compartments: see photos -lockable: without lock -Dimensions: 470/310/H620 mm -Weight: 4.5 kg

ENGINE FAULT, WON'T START Auction-ID: A1-40975-73

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

SICK WS260-G270 Photoelectric Sensor , 6 020 968 , Lot 1004H

PLC for Desma presses

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

ABB MOTORS 3 ~ ENGINE M2AA 112 M CT. FIP: 55 3GAA 112001 - HAD 27,145 Number: 9680260510002 V Hz R/min KW A 440 60 1725 4.6 8.5

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

Minakuchi NWT-300 CNC Cylindrical (ROLL) Grinder, I.D. Spindle, Fanuc O-GC, 30HP, New 1990 Machine Overall Capacity: 32" x 120" Swing: 32" Distance Between Centers: 120" Max. Swing over Table: 32" Max. Grinding Diameter: 30" Max. Work Piece Weight: 20000 LBS. Estimate at 32" x 120" Grinding Wheel: 24" x 1.968" x 10" Max. Grinding Wheel Width: 1.968" Spindle Speed: 1410/1530 RPM Spindle Wheel Motor: 30 HP Machine Weight: 30000 Lbs. Approximately Equipped with: Control: Fanuc Series O-GC (Parameters need to be reloaded) Fanuc Remote Hand Wheel Machine control functions: Coolant On/Off Switches, MODE: Off/Auto/Jog/Handle/Zero, Over Ride: 0-150%, Buttons: PRC, HIX, Spindle Inching, OTR on/off Switch, Cycle Start, Spindle Off, RT, Return, Feed Hold, Grind Off, ZRN, Emergency Stop Button Taper or Crowning Grinding Wheel Head Motor Work Head Work Rest Supports Extra Wh ...

New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959

Electronic Module, 16 Slot Chassis ALLEN - BRADLEY 16 Slot I/O Chassis 1771 - A4B B ( 1771-A4BB ) 968148908 A01 Dimensions: 610 x 315 x 200 mm

Description Piovan dehumidifiers board DST01.V2s Piovan code 968D00901 from spare parts warehouse no disassembly

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

Key data: 762 mm, 3048 mm, 813 mm

Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...

Type: MA16000/15800 Monitor: KEBA V3 Year : 2011 Screw diameter: 140 mm Shot volume: 9683 cm3 Injection weight : 8825 g Bettween tie bar HxV: 1550 X 1430 mm Maxi Mold Height: 1500 mm Min Mold Height: 700 mm Ejector stroke: 400 mm Total Clamp Open daylight: 3100mm 4 corepulling 4 Cascade Injection

* General * SKU422S1021 * MakeFryma * LocationBarneveld * CEcheck * TypeVME-400 / C * Pressure * Working pressure2.5 Bar * Vacuum possiblecheck * Working pressure jacket3 Bar * Main Features * MaterialStainless steel * Volume400 Ltr. * Motor20 KW * Specified Features - Processing vessel * MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316), Stainless steel 1.4435 (316L) * Closed stirring vesselcheck * Capacity60 Ltr. - 400 Ltr. * Vessel sizesdia. 1120x950 mm * Dished bottomcheck * With covercheck * OutletDN25, DN40 * With jacket49 Ltr. * Max. temperature150 °C * With anchor stirrercheck * Motor3/4 kW 380 Volt (EX) * Speed mixing shaft13/26 rpm. * With homogenisercheck * Motor20 kW: 968 rpm. * Information * No.F 93368 / M 15102 * Year of construction1992 * Floorspace2,9x1,5 m * Total height4,3 m * Weight3800 kg * ATEX compatiblecheck * Extra Specificationsvacuumpump Sihi L ...