DATALOGIC ds used machines

Position scanner, laser, barcode scanner -10-30 V DC -DS2100 -PG220 -Weight: 2 kg

Hersteller : Datalogic Scanner Scanner inkl., Free text 1: Komplett verkabelt mit Netzteil und Verteilerdose, Free text 2: ca.25 Meter kabel dran,

Reflective light barrier, light barrier -11-30 V DC Price: per piece -Quantity: 5 available -Weight: 0.3 kg

Position scanner, laser, barcode scanner -Type: LS50HR3 -Voltage: 4.75-28 VDC Price: per piece Quantity: 2 available -Weight: 0.7 kg

Valmet-Sisu engine type= 612/634 DS/DSE-135KW fully repaired engine with starter, alternator in exchange. info@miw-zeven.de

Pistons from MAHLE ETNR. 1350082 Suitable for Scania DS11 or other

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Hose pump for conveying corrosive, abrasive, highly viscous or highly dense liquids. Due to its simple design, the pump is self-priming, low-wear and dry-running. Manufacturer: Delasco Type: DSC65PA1S Y.O.M.: 10/2001 Q= 3.1 a / 14.95 m3/h P= 15 bar with geared motor SEW-Usocome 220/380 V; 11 kW; 1440/ 7.2/44.0 rpm Inlet opening approx. 55/100 mm Total approx. 1400 x 1300 H 1150 mm

Valmet/Sisu Engine Type=612 DSE-135KW, Factory Repaired Engine with starter+alternator.New TOP-MOTOR !!! info@miw-zeven.de

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty !! info@miw-zeven.de

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelm??ig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de

used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.

Dry air dryer No.: OD4 2201-4639 8.8 kW 400 V 50 Hz with funnel and auxiliary heating: T200 IX IZ 525-4639 Type: F2 Nr: 1AL 5153 4639 1,1 KW 400 V 50 Hz

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DEAR'S SALE, COMLETE ENGINE DAIHATSU DSb-18A & PISTON, COVER, LINER ANY PARTS Brgds Hakan KUSCU +905323642509

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below

various accessories

Soldering table Ceramics: 340 x 390 mm Equipped with: 2 Gasfackels Weight: 300 kg Table Lxwxh: 2000 x 900 x 1750 mm

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

SCANIA DS 1441 A 21T SN 5516125

21x Zebra DS3678, Barcode Scanner Hand Scanner, Bluetooth Multipurpose Industrial Scanner – used - : Price per piece ex location: only 250.-€ (net)! Ev. If you are interested, suitable chargers are also available for sale (for an extra charge)! Manufacturer: Zebra Type: DS3678 Year of manufacture: unknown Up to 100 m wireless range (Bluetooth) Price incl. 1 battery (others may be subject to an extra charge) Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel