AMBOLD evsp 55 used machines

Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination

Decorative holding card TMCC

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

diameter: 400 - 550 mm bore: 90 - 95 mm Various used face plates: Face plate 1 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 2 = 550 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 3 Röhm = 400 mm, short taper Din 55027 Gr. 6 = € 470.00 Face plate 4 = 315 mm, short taper Din 55027 Gr. 6 = € 260.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Wuerfeltisch 550 mm

Wuerfeltisch 550 mm

Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

A mobile WILLIBALD high-performance shredding machine EP 5500 Shark (48-Schlegelrotor) from a machine return due to new purchases is offered. We (the company J. Willibald GmbH) are the manufacturer of this machine. The machine is functional and in good use. • 480 hp MAN engine • Approval according to StVZO for 80 km/h incl. ABS. • 18 tons of chassis • 48-flail rotor Including the following options: • Rubber conveyor belt; Hydr. foldable (drop height approx. 4.5 meters) • Magnetic roller with collecting container • ABS • Central lubrication system • hydraulic thru-axle changer • Creep drive • Fan reversible (reversible fan) • Wireless remote control • hydr. Support foot (operation via radio) • Working lights • Diesel particulate filter • Filling hopper extension (hydraulicfold able via radio) Various biological materials can be  ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

Cone cutter Makita, type 5500 S in a fit state. Volts 220 volts motor power 1400 Watt speed of 1650/2200 lateral adjustment range 45/20 mm clamping range Max (Hxw) 240 x 210 mm trunnion strengths 0 mm to 130 mm PIN length an average 90 mm

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.