AHLBORN 144 used machines

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

GEA Ahlborn plate heaters used

Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...

Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec

Second-Hand Butter Production and Packaging Machinery Complete butter production and packaging equipment suitable for industrial dairy processing. The system includes a continuous butter machine, forming and filling equipment, and packaging units, providing an efficient solution for butter production and portion packaging. General Information - Year of Manufacturing: 2008 - Condition: Good used condition - Continuous Butter Machine - High-performance continuous butter production unit designed for reliable processing in dairy plants. - Manufacturer: AHLBORN - Model: 311/1000 - Capacity: 1000 kg/hr Maintenance History - Gear system completely revised in 2018 – hardened gears installed - Exit stars completely replaced in 2020 Output Configuration - Exit tube: 250 g - Exit tube: 25 blocks Rotary Forming and Filling Machine - Automated system for butter portion fo ...

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 60,000,Bottom floor: flat bottom with slope,Top floor: conical bottom,Design: upright,Insulation: available,Diameter inside: 3,500,Diameter outside: 3,610,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyes,Outlet: present,Outlet : 80,Remarks: Container feet are spacers for the substructure/foundation. Inside small repair points,last use: foodstuffs,material in contact with the product: V2A 1.4301

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 110,000,Lower floor: flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,484,Cylindrical height: 13,330,Total height: 14,550,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Ladder included,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:

Continuous Butter Making Machine (CBM) which has a production capacity of ± 1.000 kg of sweet, sour, or cultured butter per hour (salted or unsalted). It operates with an input of approximately 2.000 liters of cultured and/or sweet cream per hour (35–42% fat, pH ~4.8, inlet temperature 8–13 °C). The unit is fully electrically driven. All product-contact parts and the frame constructed from stainless steel. It is CIP-cleanable for hygienic operation., The system is supplied with two separate stainless steel skids., Process skid, including:, - Balance tank, - Feed pump, - Vacuum system, - Ice water system, - Flow transmitter at cream inlet (ltr/h), - Buttermilk and CIP collecting tank, - Buttermilk/CIP pump, - Buttermilk plate cooler, - Interconnecting piping and manual valves, - Stainless steel control panel with Siemens S7 PLC, Exor touchscreen HMI, and Danfoss frequency converters ...

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

Rinser-filler-capper KK for glass bottles / 144 - 144 - 24, manufacturer: KHS, year of manufacture: 2009, filler type: Innofill-DRS 144, Rinser type: Innoclean 144, Capper type: KK 24, walking direction: left - right, currently set up to 330ml, Siemens S7 Rinser-Filler-Crown cork capper, bottle filler beer, / 144-144-24, Made by KHS, Year: 2009, Type Filler Innofill DRS 144, Type Rinser: Innoclean 144, Type Capper : 24, running direction left -right, now adjusted to 330ml 33cl 0,33l, Siemens S7

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

Seal Drawing No. 14430-2815C2

Seal Drawing No. 14430-2818C2

Seal Drawing No. 14430-2824C2

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark

Panel production plant, incl. mixing plant and finishing line Slab production line, including mixing and finisching line

Motor roller, roller motor, conveyor belt motor -Drum motor: for conveyor belt -Drum: Ø 104 mm -Drum length: 495 mm -Drum: rubberized -Groove: 18 mm -Shaft ends Ø 17 mm two-edge 13 mm

There are four Pfaff sewing machines available: 1) Industrial sewing machine Pfaff 461. 2) Industrial sewing machine Pfaff 463. 3) Industrial sewing machine Pfaff 1445. 4) Industrial sewing machine Pfaff 3337.