Tilting moulders MARTIN MIT VORSCHUB type T 25 TOP ZUSTAND

Swivel spindle milling machine MARTIN T25

very good condition, the machine comes from a very small carpenter's shop, which was closed for reasons of age
everything works perfectly
all bearings and guides are OK
Year of manufacture 1997
on the milling fence, a jaw can be adjusted in depth, with fine adjustment and a mechanical counter, so dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, very precise and fast adjustments are possible with a second mechanical counter
with spindle lock by lever
the chips can be discharged very well, with 2 suction nozzles 125mm at the milling stop and at the machine table it is 100mm
with 30mm spindle, which can be swivelled continuously from -5 to 45°, the spindle is swivelled electrically with a very accurate display
with right/counterclockwise rotation
the machine will be delivered and demonstrated by us personally throughout Germany for 220.00 euros, so you have no risk when buying, shipping to Austria and the rest of the EU is also possible on request
with a large table opening up to 480mm, which can be reduced by different rings (this means that milling cutters with a very large diameter can also be used and you can also mill safely with small milling cutters)
with 3000, 6000, 4500 and 9000 rpm
Spindle height adjustment is also electric, there is also a very accurate display
the table is made of high-ribbed gray cast iron
with replaceable spindle (a 40 mm spindle can also be used)
very robust and durable design, the machine was built for the heaviest milling work, it is suitable for all milling work
Optimum power L51236686 transmission through V-belt L51236686 drive
with description
with 3-roller feed HOLZ HER, type 1117
the feed has clockwise/counterclockwise rotation and 8 speeds, the feed rollers are individually mounted
the machine table is 1180mm wide and 800mm deep + 2 table extensions on the left and right 600mm wide and there is also an extendable additional support
the machine can be used immediately
380V, 5000 and 6000W through the 2 speeds
with all the necessary protective devices, motor brake and emergency switch, the machine is approved by the Holz- BG, it has the CE seal of approval
the machine weighs about 1200kg
with motor protection switch against overload
Professional equipment, no DIY store scrap
optimal, simple, fast and safe handling

seller offer No. resale 168377489