Slotted hole drill presses GANNOMAT MIT LIEFERUNG type Junior 323 WIE NEU

Dowel and slotted hole drilling machine GANNER GANNOMAT JUNIOR 323

very good condition, the machine is absolutely new, it comes from an educational institution, which was closed about 1 year after the machine was purchased
the machine has max. 10 operating hours down
this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping
380V, 1500W
2800 rpm
Year of manufacture 2005
with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred
ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things
by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical
with 2 fold-out table extensions
the machine requires a compressed air connection of 6bar (the air consumption is very low)
Dextrorotatory
Mills and drills very well and cleanly
with 2 angle stops (one center stop and one side stop that can be used on both sides)
there is also an adjustable mitre stop
At the front of the machine table there is a 2000mm long stop rail with 2 folding stops each, the stop rail can be shortened or lengthened if necessary
The workpiece is clamped with 2 pneumatic clamping cylinders
the height adjustment from one drilling level to the other is also pneumatic, the pneumatic switch for this is located at the front of the machine, which ensures quick adjustment of grids and the drilling levels
the heights of the individual drilling levels can be read off on 2 mechanical counters, above the counters there are adjusting screws with which the drilling heights can be adjusted
with a precision 12mm grid rail, which has a center grid and 12 grids left and right
can be quickly converted to slotted milling L51236686 machines, the machine L51236686 can then be used without a grid with 2 adjustable stops on the left and right and then has a width of max. 420mm
The max. drill hole height is 100mm
the max. drill hole depth is 150mm with stop and scale
The max. workpiece height is 160mm
Everything works perfectly
the machine will be delivered and demonstrated by us personally for 220.00 euros throughout Germany, so you have no risk when buying, delivery to Austria and the EU is also possible on request
the machine table is 870mm wide, on the sides it is 140mm deep and in the middle it is 350mm deep
Professional equipment, no DIY store scrap
you can start working with the machine immediately
with 2 jaws - drill chuck up to 20mm
Very stable and durable construction
the precision guides with the backlash-free ball bearing bushings are OK and go easily

seller offer No. resale 168377486