HOSOKAWA MIKROPUL acm used machines

* General * SKU353S829 * LocationBarneveld * MakeHosokawa Micron * TypeACM-15 * Main Features * Motor11 KW * Inlet diameter160 mm * Specified Features - Classifier mill * MaterialMild steel * Classifier Mills * Grindercheck * Rotor sizeØ 190x90 mm * Grinding room sizeØ 275 mm * Fixed hammerscheck * Number of pins on house side:24 * With grinding trackcheck * InletØ 160 mm * Feeding with rotating valvecheck * Motor11 kW 400/690 Volts * With variable speed drivecheck * Speed160 - 1 600 rpm. * Information * No.600088071 * Year of construction1988 * Mounted on framecheck * With switchgearas is * Floorspace1,3x1,4 m * Total height1,4 m * Weight2 450 kg * Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6, with spare partsClassifier millsHosokawa M ...

* General * SKU353S828 * MakeHosokawa Micron * TypeACM-15 * No.600880072 * Year of construction1988 * Main Features * Motor11 KW * Inlet diameter160 mm * Specified Features - Classifier mill * MaterialMild steel * Classifier Mills * Grindercheck * Rotor sizeØ 190x90 mm * Grinding room sizeØ 275 mm * Fixed hammerscheck * Number of pins on house side:24 * Without sieve cagecheck * InletØ 160 mm * Feeding with rotating valvecheck * Motor11 kW 400/690 Volts * Speed160 - 1 600 rpm. * Information * Mounted on framecheck * LocationBarneveld * With switchgearas is * Floorspace1,3x1,4 m * Total height1,4 m * Weight2 450 kg * Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6 Classifier millsHosokawa MikropulMills > Classifier millsBrand > Hosokawa Mik ...

* General * SKUR1382 * LocationBarneveld * MakeHosokawa Mikropul (D) * Main Features * Motor15 KW * Inlet diameter50 mm * Specified Features - Classifier mill * MaterialMild steel * Classifier Mills * Grinderclassifying fine impact mill * 2 Driven rotorscheck * Rotor sizedia. 195mm * Grinding room sizedia.330x130mm * Pin diameter10mm (16x) * With grinding trackcheck * Inletdia. 220mm rotating valve to inlet 50mm * Feeding with rotating valvecheck * Motormill 15,0 kW, classifier 3,0 kW , 380 Volt * Information * TypeACM 10 * No.600088063 * Year of construction1988 * Mounted on framecheck * With switchgear(as is) * Floorspace1,5x1,9 M * Total height1,2 M * Weight900 Kg * Extra Specificationswith ventilator, explosion valves and noise reduction pipeClassifier millsHosokawa MikropulMills > Classifier millsBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working cond ...

* General * SKU300P652 * LocationBarneveld * MakeNauta Vometec Mikropul * Type12 HP 4 TRL BV * No.2107500038 * Year of construction2000 * Main Features * MaterialStainless steel * Specified Features - Fluid bed dryer batch * Fluidbeddryercheck * Pan sizesdia. 400mm * Bottom dischargecheck * With sprayercheck * Without fancheck * With dust filtercheck * Filter surface3.6 m2 * Cleaning with air pulsecheck * MaterialStainless steel * Information * Floorspace2,0x1,6 M * Total height3,5 M * Weight1000 KgFluid bed dryers batchHosokawa MikropulDryers > Fluid bed dryers batchBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU245P359 * MakeMikropul Gmbh (DE) * Type9-4 SC PSR * No.4461 * Year of construction1984 * LocationBarneveld * Main Features * MaterialStainless steel * Surface4 m2 * Specified Features - Bag filter * Envelope filtercheck * Filter surface4 m² * Number of envelopes:9 * Envelope sizesdia.120mm x1200mm * Cleaning by air pulsecheck * Bag filters * MaterialStainless steel * Information * Floorspace1,2x1,0 M * Total height3,1 M * Weight400 KG * Extra Specificationswith extra filters easy change systemBag filtersHosokawa MikropulDust separators > Bag filtersBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Hammer mill Mikropul Cologne Type 3SCB Serial number: 610098002 Year of construction: 1979 Electric motor 30 to 75 Kw can be used Height: 1200 mm Width: 1200 mm Depth: 1000 mm Inlet: 170 mm x 170 mm Outlet diameter: approx. 500 mm Roller: 400 mm x 350 mm Changes and errors in the technical data, data and prices as well as intermediate sale reserved.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindric ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Slightly used, in like new condition, classifier mill Hosokawa ACM 5 Pharma. This micronizer allows you to obtain a perfectly controlled top cut. It can be used to fine grind different products. The comminution occurs in the lower part of the grinding chamber where the feed particles are crushed. Thanks to the adjustable classifier wheel on the upper part of the grinding chamber, the ...

Features and advantages of the classifier mill ACM: • Grinding and classifying in one machine. • Excellent selectivity, steep particle size distribution. • Infinitely adjustable fineness. • Flow-optimized, conical classifier wheel guarantees product without oversize grain and low wear compared to cylindrical classifier wheels. • Cool and gentle grinding due to high air flow. This makes the ACM ideal for processing temperature-sensitive products. • Deflection area in the grinding chamber lid: classifier gap flushing not required. • Low noise emission. • Very good running characteristics due to the belt-driven grinding disc. Bzc3pyxj32 • Easy to maintain: motors and bearings easily accessible. • The lid lifting device allows quick access to the grinding and viewing zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Option ...

Rental Hosokawa Alpine ACM 2 system by Alpine Rentals. The Hosokawa Alpine Mikro ACM impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process coarse products up to approx. 3 Mohs´ hardness by reaching an extremely high end-product fineness values between d97 10 to 120 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles a ...

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

Fully refurbished Hosokawa Alpine AHM 90 used system by Alpine Originals Unit available for rental as well. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close circuit and batch mode of good flowable suspensions where high end-product fineness even in nano range are required. The fine grinding takes place in a liquid with the aid of a bed of agitated milling beads. The mill is suitable for different products such as chemicals, minerals, pcc, dental ceramics, foodstuffs, metals, pigments and paints, laboratory, nano particles, abrasives, pharmaceutics for submicron and nano-scale milling. Technical details Stainless steel, non ATEX Scope of supply Wet mill Hosokawa Alpine AHM 90, grinding tools and grinding media A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original m ...

Material: Steel We are going to overhoul this machine before the delivery. You can also get the entire system with all components you need.

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...

Schugi Flexomix type 335 mixer and Agglomerator. Between 3 and 10 t / h, power 45 kw including screw, scale and spare parts package.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower